GHB 60M HDMI Extender HDMI Extension Amplifier 1080P Cat6 / 6a / 7 Ethernet Cable for Local Display Signal Transmission IR W / HDMI Output Local etc.- Black
Here is the new HDMI extender offered by GHB, is able to convert an HDMI signal into a signal compatible with the network and transmitted over long distances
Kit composed by transmitter (Tx) and receiver (Rx), connecting these 2 boxes via a LAN cable CAT.5 / 6/7 you will have the possibility to transmit your signal to any device within the radius of 50-60 meters
Support IR remote control with wide frequency 20 ~ 60 kHz, and supports the following resolutions: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Thanks to the full HD transmission technology take the most vivid images
Supports Cat7 / Cat6 / Cat6a cable that follows the IEEE-568B standard. Supports uncompressed audio such as LPCM
HDMI extender cable, extends the use of technology to a whole new generation of HDMI. Videos with 1080P HD resolution via CAT7 specifications extend for 60 meters. Not only does it break the transmission distances of the HDMI cable, so that other domestic projects and wiring are more stable and efficient, it also saves significantly.
HDMI Source Device☛ Extender TX ☛ Ethernet Cable ☛ RX Extender ☛ HDMI Display
Does not work with ROUTER or SWITCH
Supporta la funzione IR
Con la funzione IR incorporata, che supporta l'ampiezza di 20-60 KHz, controlla facilmente un lettore DVD o altra sorgente video HDMI da una postazione remota
Plug and Play
Nessun driver necessario, design hardware puro, che rende durevole l'Extender
✡ Supporta le risoluzioni: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
✡ Cavo di rete: Nucleo di rame privo di ossigeno a bassa resistenza e consumo (UTP / STP CAT6 / 6A / 7)
✡ Telecomando IR: supporto frequenza larga 20 ~ 60KHz
✡ Temperatura in funzione: 0℃～60℃
1080P High Definition Video
✡ Extend HDMI 1080p signal up to 60M
✡ HDMI signal: HDCP compliant
✡ HDMI without loss of transmission
✡ Pure hardware
transmission ✡ Full HD transmission
✦ Stability is influenced by transmission distances and cable quality HDMI. We recommend using a high quality HDMI cable. If there is no signal transmission or flickering of the screen, press the RESET button.
✦ Only support PCM audio output
✦ Before installing, do not mix the sender from HDMI to RJ45 and the receiver from RJ45 to HDMI.
✦ Do not unplug when operating
✦ Make sure the cables are connected correctly.
✦ Please press the RX RESET button when no image is
output ✦ Make sure the cables follow 568B, reset TX / RX for HDMI signal input when the "LINK" RX LED is flashing continuously.
1 x HDMI Extender Sender
1 x HDMI Extender Receiver
1 x IR Blaster Extension Cable
1 x IR Receiver Extension Cable
2 x DC5V / 1A
1 x User's Manual
Some problems that may occur:
D: Does not connect. I tried with two different types of ready-made cat 6 cables (only 2 m long) and I tried to reset etc. But it does not connect.
A: Please confirm if RX and TX are on the correct side.
D: It does not reach 60m on cat5e as written in the description.
A: We recommend using the cat6 cable.
Q: I need to extend the video signal of 1920 x 1200. My device supports only 1920 x 1080.
A: Our product is only 1080P.
Q: Why is the image not displayed?
A: Please check the length of the cable used. It is advisable to use a network line between 20 and 60 meters long (in case it is less than 20 meters, the signal is too strong and the image will not be displayed).